Can You Fit 35 Inch Tires on a 3 Inch Lift Toyota Tacoma?

You can fit a 35 inch tire on a 3 inch lift in Toyota Tacoma. You need a minimum lift of about 2 inches to install such tires. 3 inches is the ideal lift for your Toyota Tacoma to handle the 35 inch tires well. You won’t need to buy anything as the car will take the tires ideally.

Installing 35-inch tires on a 3-inch lifted Toyota Tacoma is not simple. Before upgrading, you need to understand the minimum lift requirement. You also need to know the suspension setup and the clearance needed.

Here, we’ll take a closer look at the procedure and factors to consider. If you are ready to take your off-road game next level with your Tacoma, stick till the end of this guide.

Can You Fit 35-Inch Tires on a 3-Inch Lift Toyota Tacoma? An Overview of the Factors to Consider

Here is a table illustrating what you should consider before the modification:

Lift HeightMinimum of 2 inches, 3 inches being ideal, and 3.5 is the best for 35-inch tires.
SuspensionProper suspension setup is crucial for alignment and handling.
Wheel Wells and Fender ClearanceThese parts should not be touched by the tire to avoid rubbing.
Power and PerformanceYour Tacoma Engine should be able to handle the stress new tires will bring.
Drivetrain and BrakesYou need strong brakes for the extra tire load.

Should you Change to 35-inch Tires or Not?

So now you know the answer to the question, can you fit 35s on a 3-inch lift Tacoma? So, should you try it? Before making any change, see the benefits and limitations of installing 35-inch tires on your Toyota Tacoma.

Advantages of Changing to 35 Inch Tires

You will gain the following:

  • Improved off-road capabilities
  • Increased ground clearance
  • Enhanced appearance
  • Increased towing capacity
  • Puncture resistance

Disadvantages of Changing to 35 Inch Tires

Here are the downsides of the modification:

  • Reduced fuel efficiency
  • Reduced on-road handling
  • Increased wear and tear
  • Reduced turning radius

You can do further modifications to avoid these cons. For instance, you could have a more powerful engine and transmission.

How Much Will it Cost to Install 35-Inch Tires on a Toyota Tacoma?

After knowing the answer, “can you fit 35s on a 3-inch lifted Toyota Tacoma?”, the next thing you’d want to know is how much it costs. Here is a breakdown:

● 35-inch Tires: These are the larger tires that will be installed on your Toyota Tacoma. The price for these can range from $200 to $300 for each tire. The total for 4 tires will be $800 to $1200.

● Lift Kit: This kit is priced from $50 to $300, depending on the type and quality of the kit.

● Suspension and Alignment Modification: These modifications can include upgrading to aftermarket suspension components. They will cost from $500 to $1000 or more.

● Labor: The cost depends on your location and choice of mechanic. But you can expect to pay anywhere from $500 to $1000 or more for the labor.

In total, expect to spend about $2000 to $8000 for the procedure.

Step-by-step Guide on How to Fit 35 Inch Tires on a 3-Inch Toyota Tacoma

Here is the correct way to modify this to avoid future Toyota Tacoma problems:

1. Gather the Necessary Tools and Equipment

Before you begin the installation process. Gather all the necessary tools and equipment. You will need a floor jack and stands, a lug nut wrench, a torque wrench, and various sockets and wrenches.

You will also need to purchase the 35-inch tires and lift kit. You may need additional components or modifications depending on your Tacoma model.

2. Raise the Vehicle

Use the floor jack to lift the Tacoma and place it on jack stands. Ensure the vehicle is securely supported and will not move while working on it.

3. Remove the Wheels

Use the lug nut wrench to loosen and remove the lug nuts, then carefully remove the wheels. Be sure to keep track of the order and location of the lug nuts so you can reinstall them correctly.

4. Install the Lift Kit

This will involve removing the factory suspension components and replacing them with the components from the lift kit. This is where the necessary modifications to the suspension and alignment of the Tacoma will be made.

Ensure everything is bolted to the right torque and it is secure to support the new tires.

5. Install the New Tires

With the lift kit, you can install the new 35-inch tires. Carefully place the tires on the wheels and reinstall the wheels on the Tacoma. Be sure to torque the lug nuts to the correct specification.

6. Align the Vehicle

It is essential to have the vehicle aligned to ensure proper handling and prevent uneven tire wear. A professional should do this, and you should expect to pay around $100 to $200.

It is an extremely delicate procedure that requires accuracy. That is why we discourage you from doing it yourself. If you align the tires unevenly, you could have problems with steering and tire wear.

7. Test Drive

Take it for a test drive to check for proper handling and any issues that may need to be addressed. Pay attention to any vibrations, pulling, or other issues that may indicate a problem with the installation or alignment.

How to Stop the New Tires from Rubbing With Other Car Parts?

To prevent this from happening, you will need to modify your Tacoma.

● Trim the pinch weld: Use a metal cutting tool such as a saw or grinder to remove a small portion of the pinch weld.

● Modify the front bumper: If the front bumper is too close to the tires, it may need to be modified. It can also be replaced with a larger or aftermarket bumper to provide additional clearance.

● Adjust the cab mount: Loosen the bolts that attach the cab mount to the frame and move it slightly away from the tires.

● Install fender flares: Use aftermarket fender flares or modify the factory fender flares.

● Modify the wheel well liner and body: Use a cutting tool to remove a portion of the wheel well liner.

● Adjust the upper control arms: Use a wrench or socket to adjust the length of the upper control arms.


Here are answers to some questions that will come up in the process.

What Should I Consider When Choosing the 35 Inch Tires?

Consider the type of driving you will be doing and the terrain you will be driving on. For example, if you will be doing a lot of off-roading, you’ll need special tires.

They should be designed for off-road use and provide good traction and clearance. Also, consider the load rating of the tires and ensure they can handle the weight of your Tacoma when loaded.

Can Changing to 35 Inch Tires Damage the Transmission?

Yes. Oversized tires can cause Toyota Tacoma transmission problems. Your ration will be worse off than before. However, you can overcome the problem by regearing.

Can I Save Costs When Changing to 35 Inch Tires?

Yes, you can. You should DIY to save on labor costs. You can also purchase refurbished tires and lift kits to save further. However, ensure you go for quality over price.

Key Takeaways:

The above information has answered the question, can you fit 35 inch tires on a 3-inch lift Toyota Tacoma? To sum up:

  • Yes, you can fit 35-inch tires in a 3-inch lift Tacoma.
  • It will cost you $2000 to $8000, depending on various factors.
  • One advantage of this modification is improved off-road capabilities.
  • One disadvantage is reduced turning radius.
  • You can get around the disadvantages by making further adjustments.

Leave a Comment